.png)
.png)
.png)
.png)
.png)
Pillar reinforcement technology does not require surface chipping and anchor drilling.
Slab reinforcement technology effectively reinforces with non-adherence method
This is a T-shape beam reinforce-ment technology that reinforces the shear strengthening steel to above the neutral axis
The central pillar was removed to maximally expand the central space, then the surrounding pillars were reinforced
The non-vibrating rock crushing technology crushes without noise or vibration with specially made hydraulic jacking device
Most of the existing methods uses installation of strut and using the strut to push, but Korea E&C's technology pulls from each side to improve construction and cost.
.png)
Budongyo, built in 1933 when the March First Independence Movement took place, is an old steel bridge. The bridge bearing rusted and lost its construction function, causing cracks in the beam. Epoxy was injected with steel adherence, but the bridge bearing did not get fixed. The bridge was dangerous enough within years that they were planning on just destructing it. However, Korea E&C donated the construction cost and began the work in 2004. The steel panel was removed first and the bearing was replaced. You could see that it was already separated from the concrete long time ago, but it was hard to see behind the steel panel. The adherence of concrete with the coefficient of linear expansion will fall off without much force.
Passage reservation before construction
Steel panel automatically fell after cutting the bolt
After construction
.png)
.png)
.png)
.png)
