.png)
.png)
.png)
.png)
.png)
Pillar reinforcement technology does not require surface chipping and anchor drilling.
Slab reinforcement technology effectively reinforces with non-adherence method
This is a T-shape beam reinforce-ment technology that reinforces the shear strengthening steel to above the neutral axis
The central pillar was removed to maximally expand the central space, then the surrounding pillars were reinforced
The non-vibrating rock crushing technology crushes without noise or vibration with specially made hydraulic jacking device
Most of the existing methods uses installation of strut and using the strut to push, but Korea E&C's technology pulls from each side to improve construction and cost.
.png)
The ground on the lower portion of the support system before concrete placement was sinking, causing slap and PC beam droop. The drooping slab was raised with jack-up method and the PC beam that had cracked was removed and exchanged with a new one. The reinforcement left no residues.
During construction
After construction
.png)
.png)
.png)
.png)
