.png)
.png)
.png)
.png)
.png)
Pillar reinforcement technology does not require surface chipping and anchor drilling.
Slab reinforcement technology effectively reinforces with non-adherence method
This is a T-shape beam reinforce-ment technology that reinforces the shear strengthening steel to above the neutral axis
The central pillar was removed to maximally expand the central space, then the surrounding pillars were reinforced
The non-vibrating rock crushing technology crushes without noise or vibration with specially made hydraulic jacking device
Most of the existing methods uses installation of strut and using the strut to push, but Korea E&C's technology pulls from each side to improve construction and cost.
.png)
The basement floor of the funeral ward of Uiseong hospital (floor area 1,000m (40x25m) was not settled because it was built on hard ground, but when the water damage occurred from flooding resulted the building to be half tilted. The weight of the building was around 3,000 ton and the floor area was 1,000m2, so when more than 3m of the floor sinks under water, the building begins to rise up due to buoyancy. We suspected that the building was raised to 1m and sunk again, and proceeded with indenting 60 of the 100 ton of stakes all at the same time to restore the situation.
Before construction
After construction
.png)
.png)
.png)
.png)
